##########################
# realm.list - List of Diablo II Realms #
#----------------------------------------------#
# Realms are areas that hold closed characters and games. #
# Users are given this list of realms to choose from when #
# creating a new character. Next time the character is #
# used, they will automatically join the same realm. #
# The realm server runs on port 6113 by default. #
# If you do not specify a port number, it will use this by default. #
# <realmname> : the realm name (mandatory; must start and end with " ) #
# <description> : the realm description (optional; must start and end with " ) #
# ip:port - actual ip the d2cs server is running on (mandatory) #
#
# --- realm name --- --- description --- --- real address --- #
# (mandatory) (optional) (mandatory) #
#-------------------------------------------------------------------------------#
# "<realmname>" ["<description>"] <ip:port> #
###############################################
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" FOR ANY IP ADDRESS
# example (having a d2cs server running on IP 1.2.3.4): "D2ONE" "XXXX Closed Realm" 11.22.33.44:6113
"D2TWO" "OOOO Closed Realm" 11.22.33.44:6115 这里的理解要清晰，如果国度服务在数据机上，那么IP就和数据机一致，但端口号就需要注意不要和任何一个服务相冲突了。默认是6113，另外PVPGN服务默认的是6112，D2DBS服务默认的是6114，方便记忆，我们将第二个国度服务端口设置为6115
第二步，编辑每个国度的国度配置文件d2cs.conf，和国度有关的内容主要为
d2cs.conf
###########################################
# d2cs.conf - Configuration file for the diablo2 game control server #
#-------------------------------------------------------------------------------#
# This file is an example configuration and may require modification to #
# suit your needs or your site. Blank lines and lines starting with a "#" #
# are ignored. Use quotes around values that contain spaces. #
#####################################
###################
# Server Major Settings #
#---------------------------------#
# Your realm server name 你的國度服務器名稱 #
# Here you put the value of the first column from the realm line in realm.conf
# Example, if you have the line
# "MyRealm" "My Super Realm" <someIP>:6113
# in realm.conf then here you put realmname = "MyRealm"
#必須和realm.conf裏的國度名稱保持一致，如果是多国度，国度机上的d2gs.reg相关国度名称必须和这里一致，也就是说每个不同的国度机上的d2cs.conf有关realmname的值必须和该国度机的D2GS读取的d2gs.reg一致。 realmname = D2ONE; 这里注意和国度列表配置文件中的保持一致 # This is a comma delimited list of hostnames that the server should
# listen on. Generally, YOU DONT NEED TO TOUCH THIS but it might be useful
# to make an internal-only server on a gateway machine for example. If the
# list is not set or if it has a entry with no host component, the server will
# bind to that port on all interfaces.
# d2cs default listening port is 6113
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" !!! 注意！不能夠用127.0.0.1或localhost，但可以用域名
#下面是在本例中带国度服务的数据主机的设置，如果是国度主机就应该是servaddrs=55.66.77.88:6113 servaddrs = 11.22.33.44:6113; 这里注意和国度列表配置文件中的保持一致 # This is a comma delimited list of game servers. Put here the IPs
# (without ports) of the machines running d2gs. If you run d2gs on the same
# machine as d2cs you put the IP of that machine here.
# Example: gameservlist = 192.168.1.10
# (if you have a d2gs running on a machine with the IP 192.168.1.10)
# YOU MUST CHANGE THIS OR D2CS WON'T WORK PROPERLY
# 注意！不能夠用127.0.0.1或localhost，但可以用域名，这里的IP值要将所有D2GS服务机的IP都列上，之间以半角逗号间隔
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" !!!
# gameservlist = <d2gs-IP>,<another-d2gs-IP> gameservlist = 11.22.33.44,55.66.77.88 # Put here the address and port of the machine running bnetd (or pvpgn.exe).
# If you run d2cs on the same machine as bnetd (or pvpgn.exe) then here you
# put the IP of that machine.
# YOU MUST CHANGE THIS OR D2CS WON'T WORK PROPERLY
# bnetd default listening port is 6112
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" !!!注意！不能夠用127.0.0.1或localhost，但可以用域名
#这里的IP为PVPGN所在服务器的IP bnetdaddr = 11.22.33.44:6112; 注意要和bnetd.conf保持一致。
########################################
# Message logs #
#-------------------------------------------------------------------------------#
# Multiple log levels can be defined by connecting them with a comma (,)
# Available loglevels are:
# none
# trace
# debug
# info
# warn
# error
# fatal
# loglevels = fatal,error,warn,info
loglevels = fatal,error,warn,info
#
###########################
# File and Path section 文件和路徑設置 #
# Use absolute paths in these lines to avoid problems! #
#----------------------------------# logfile = var\d2cs.log
charsavedir = var\charsave
charinfodir = var\charinfo
bak_charsavedir = var\bak\charsave
bak_charinfodir = var\bak\charinfo
ladderdir = var\ladders
newbiefile = files\newbie.save
transfile = conf\address_translation.conf
d2gsconffile = conf\d2server.ini
#########################################
# d2dbs.conf - Configuration file for the Diablo2 Game database server #
#-------------------------------------------------------------------------------#
# This file is an example configuration and may require modification to #
# suit your needs or your site. Blank lines and lines starting with a "#" #
# are ignored. Use quotes around values that contain spaces. #
#########################################
# Server Major Settings #
#-------------------------------------------------------------------------------#
# This is a comma delimited list of hostnames that the server should
# listen on. Generally, YOU DONT NEED TO TOUCH THIS but it might be useful
# to make an internal-only server on a gateway machine for example. If the
# list is not set or if it has a entry with no host component, the server will
# bind to that port on all interfaces.
# d2dbs default listening port is 6114
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" !!!服務器地址，可以是公網IP或域名，但不能使用127.0.0.1或localhost servaddrs = 55.66.77.88:6114
# Put here EXACTLY the same thing you put in d2cs.conf gameservlist setting.
# For more information about this setting consult the d2cs.conf comments
# above it.
#
# YOU MUST CHANGE THIS OR D2DBS WON'T WORK PROPERLY
#
# WARNING!! DO NOT USE "127.0.0.1" or "localhost" !!!游戏服务地址，可以是公網IP或域名，但不能使用127.0.0.1或localhost
# gameservlist = <d2gs-IP>,<another-d2gs-IP> gameservlist = 11.22.33.44,55.66.77.88 ##########################################
# Message logs #
#-------------------------------------------------------------------------------#
# Multiple log levels can be defined by connecting them with a comma (,)
# Available loglevels are:
# none
# trace
# debug
# info
# warn
# error
# fatal
#loglevels = fatal,error,warn,info 信息日志级别
loglevels = fatal,error,warn,info
# #
#################################
##################
# File and Path section #
# Use absolute paths in these lines to avoid problems!日志文件地址或路径 #
#-------------------------------------------------------------------------------#
logfile = var\d2dbs.log
logfile-gs = var\d2dbs-gs.log
charsavedir = var\charsave
charinfodir = var\charinfo
ladderdir = var\ladders
bak_charsavedir = var\bak\charsave
bak_charinfodir = var\bak\charinfo
#########################
第五步，这里无关紧要，但得提一下，有关国度的设置在bnetd.conf也有相关项目，内容如下：
######################################
# D2CS realm server settings #
#----------------------------------------------------------------------------#
# Version of D2CS server to connect with (set to zero to disable version check)国度对版本的检查
d2cs_version = 0
# Allow the D2CS server to change realm names?允许d2cs自己设置国度名称，默認禁止false
# true将使用d2cs中指定的国度名称，不使用realm.conf
allow_d2cs_setname = true
# #
################################
;Standard windows INI file format
[D2GE]
DebugDumpThread=1
;
;EnableMeleeHireableAI：当设置为1的时候，将修改ACT2和ACT5雇佣兵的AI设置，当中了IM（钢铁处女）诅咒之后，停止攻击，直到诅咒消失或者被别的诅咒取代（嘿嘿，再也不怕ACT4了）
;EnableNeroPetAI：当设置为1的时候，将修改Nec召唤的铁魔、石魔的AI设置，当中了IM（钢铁处女）诅咒之后，停止攻击，直到诅咒消失或者被别的诅咒取代（骄傲铁魔的救星！）
;EnableExpGlitchFix：当设置为1的时候，将修改组队下经验值分配算法，按照官方公布的正确算法执行。（程序实现的算法有Bug）
;DisableUberUp：当设置为1的时候，在3BOSS场地所有的召唤出来的小怪将不再拥有经验值。（防止Uber快速升级）
;EnableUnicodeCharName：当设置为1的时候，服务器将允许使用Unicode的角色名字，例如汉字的角色名字。注意，需要修改过的D2CS支持！请参考UnicodeCharName目录下面的说明！
;EnableWarden：当设置为1的时候，将启动Warden模块，可以检测到客户端是否运行了一些Hack程序，例如d2jsp等，并自动将玩家踢出游戏！
;EnablePreCalculateTCNoDropTbl：当设置为1的时候，将预先计算怪物死的时候多人NoDrop的浮点计算，有利于提高服务器的性能
;EnableEthSocketBugFix：当设置为1的时候，禁止无形防具公式打孔额外50%防御值奖励
;DisableBugMF：当设置为1的时候，禁止BugMF各个关底的BOSS，安姐、督瑞尔、老墨、Diablo和巴尔
;DisableDCSpawnInSomeArea: 当设置为1的时候，禁止在“混沌避难所”、“亚瑞特山脉之巅峰”以及最后几个超级BOSS处产生DiabloClone。
;EnableMeleeHireableAI: When set to 1, the ACT2&ACT5 hireable's AI will be fixed, when the hireable is cursed by IM, he will stop attack monster, until the cruse disappear or replace by another curse.(Your melee pet will be more safer!)
;EnableNeroPetAI: When set to 1, the Nero Golem's AI will be fixed, when the golem is cursed by IM, it will stop attack monster, until the cruse disappear or replace by another curse.(Your Pride Nero Iron Golem will be more safer!)
;EnableExpGlitchFix: When set to 1, the experience that player get when in party will be fixed.(The orig program has some bug, you will get only 1 exp when in 8pp party killing hell diablo.)
;DisableUberUp: When set to 1, you will get 0 exp when killing the monster summon by Uber Boss(including Uber Meph and Uber Diablo). This will prevent the Uber Up.
;EnableUnicodeCharName: When set to 1, the server will allow the unicode charname login the game. NOTE: Need modified D2CS support! Please check the UnicodeCharName directory!
;EnableWarden: When set to 1, the server will start a d2warden thread, and use a build-in MOD check the client for hack or bot. See d2warden.ini for detail.
;EnablePreCalculateTCNoDropTbl: When set to 1, the multiply players TC NoDrop floating-point calculation will be pre-calculated, and this can improve your server performance.
;EnableEthSocketBugFix=1 ; This will disable additional 50% reward of eth armor when use the cube.
;DisableBugMF=1 ; This will disable all ACT boss quest drop within a non-quest drop game.
;DisableDCSpawnInSomeArea=1; This will not spawn DiabloClone in 'The Chaos Sanctuary' 'Arreat Summit' and Uber Boss Levels.
[NewFeatures]
EnableMeleeHireableAI=1
EnableNeroPetAI=1
EnableExpGlitchFix=1
DisableUberUp=1
EnableUnicodeCharName=1
EnableWarden=0
EnablePreCalculateTCNoDropTbl=1
EnableEthSocketBugFix=1
DisableBugMF=0
DisableDCSpawnInSomeArea=1
;UberQuest设置
;SpawnProbability：当BOSS施展技能时，有多大概率进行召唤，0~100之间的整数，例如30，表示30%的概率
;MaxSpawnNum： 在一场游戏中，最大施展召唤的次数
;SpawnInterval：两次召唤之间的最小时间间隔
;ActivArea：多远距离可以开始施展召唤
;StallTime：施展召唤之后，BOSS停顿时间
;SpawnMonsters：BOSS施展召唤时，随机召唤的怪物类型（hcidx），必须是0~733之间的整数，最多10种怪物类型，每次召唤1个。
;UberQuest configuration in d2server.ini
;SpawnProbability: The probability that the Uber bosses try to spawn a monster, should be a int between 0~99;
;MaxSpawnNum: Max spawn number of monsters in a single game;
;SpawnInterval: the interval time between two spawns;
;ActivArea: how far ways that the uber boss try to spawn a monster;
;StallTime: After spawn a monster, the boss should stall for some time;
;SpawnMonsters: The monster type that a boss can spawn, should be a 0~733. You can look up the monststat.txt to get some hits. A boss can spawn 10 types of monsters at most;
[World Event]
Enable=1
;1, 单房间出DC设置
;在d2server.ini中增加一行
; DcItemRate=1000
;1000表示每个key都是100%几率出DC
;100表示10%
;500表示50%, 其它类推
;此时原有的全服务器出DC设置仍然起作用, 可将
;ItemRangeMin和ItemRangeMax设置为极大的数字, 避免全服务器数量达到时所有房间出现DC
;
;2, 全服务器出DC设置
;将DcItemRate设置为=0
;即可关闭单房间出DC的可能性
;
;3, 根据需要, 也可以让两种方案同时起作用
; Enable DiabloClone Spawned only in the only game where the key sold.
; Also, all games in a server can spawn DCs when the original condition meet.(ItemRangeMin,ItemRangeMax,...)
; DcItemRate=1000 100% spawned DiabloClone in the only game
; DcItemRate=0 0% spawned DiabloClone in the only game
DcItemRate=200
;是否显示“XX颗乔丹之石卖给商人”的消息
ShowSOJMessage=1
;update interval in seconds
UpdateInterval=10
;Notes: even if DC spawns in non-hell difficulty, it can only drop USC in hell difficulty
;e.g: Difficulty=normal,nightmare,hell means spawn DC in any difficulty
Difficulty=hell
;you will be happy when SpawnMinions set to non zero...
;如果你觉得很牛，可以设置一次K十个CD试试。。。
SpawnMinions=0
ItemDataFile=ItemConfig.dat
;World event trigger item config
Item=Key
;Total items needed to trigger DC is:
;[ItemRangeMin, ItemRangeMax] + (ItemNormalGameFactor * NormalGames)/100
;+ (ItemNormalPlayerFactor * NormalPlayers)/100 + ...
;NormalGame, NormalPlayers ... all are current dyanmic count on this server
ItemRangeMin=1
ItemRangeMax=1
ItemNormalGameFactor=0
ItemNightmareGameFactor=0
ItemHellGameFactor=100
ItemNormalPlayerFactor=0
ItemNightmarePlayerFactor=0
ItemHellPlayerFactor=100
[Key]
Mods = code=key
[The Stone of Jordan]
Mods = code=rin & quality=unique & prefix=122
[7% mf sc]
Mods = code=cm1 & quality=magical & mf=7
[UM Rune]
Mods = code=r22
[Unique or Set ring]
Mods = code=rin & quality=unique, quality=set
[UnID unique ring or unID set amulet]
Mods = code=rin & quality=unique | code=amu & quality=set
;Item Format:
;Logical operators:
;'|' ';' high priority OR
;'&' normal priority AND
;',' low priority OR
;e.g:
;mod1 | mod2, mod3 & mod4 = mod1 ; mod2, mod3 & mod4 = mod1 || ((mod2 || mod3) && mod4) (unsupported c like expression)
;all spaces are ignored
;any character after '/' will be treated as comment and ignored
;Mod format:
;[mod] [<|=|>|<=|>=] [value]
;Currently supported mod list:
;Type -> item base type id
;can be found from weapons.txt armor.txt misc.txt
;notes: the ID start from 0 instead of 1
;code -> item code
;can be found from weapons.txt armor.txt misc.txt
;quality -> tempered, craft,unique,set,rare,magical,superior,normal,inferior
;prefix -> item prefix id
;actually, for unique/set/runeword items, it is the name index.
;can be found from UniqueItems.txt, SetItems.txt, Runes.txt
;notes: the ID start from 0 instead of 1
;ilvl -> item ilvl
;stat[n] -> stats value
;see ItemStatCost.txt ID column
;flag[n] -> item flag value
;see alias for common used flags
;MPQVersion -> item version
;ItemClassic for classic item, ItemExpansion for expansion item, ItemExpansion110 for items after 1.10
;Common used alias
;socket = number of socket
;ethereal = [1|0]
;ear = [1|0]
;runeword = [1|0]
;broken = [1|0]
;identified = [1/0]
;personalized = [1/0]
;gems = number of gems socketed
;unsupported now
;gem[n] = mod of certain gem
;suffix = item suffix id
;and item magical prefix/suffix, use Stat[n] to check them now
;e.g: mf=7 & code=cm1 or stat80=7 & code=cm1 means 7% mf sc